More actions
No edit summary |
No edit summary |
||
| Line 72: | Line 72: | ||
* Consecutive links are connected by joints which exert the degree of freedom. | * Consecutive links are connected by joints which exert the degree of freedom. | ||
D-H Parameter | |||
* link length(a): length along the common normal from axis (i-1) to axis i | * link length(a): length along the common normal from axis (i-1) to axis i | ||
* link twist(α): angle between this parallel line and axis (i-1) | * link twist(α): angle between this parallel line and axis (i-1) | ||
* link offset(θ): distance alont the line on axis i between the common normal for link (i-1) and common normal for link i | * link offset(θ): distance alont the line on axis i between the common normal for link (i-1) and common normal for link i | ||
* joint angle(d): angle between the two common normal for link (i-1) and common normal for link i | * joint angle(d): angle between the two common normal for link (i-1) and common normal for link i | ||
* Revolute joint: joint angle(variable), link offset(constant) | |||
* Prismatic joint: joint angle(constant), link offset(variable) | |||
== Comments == | == Comments == | ||
선배님 너무 멋있어여 - [[조예진]] | 선배님 너무 멋있어여 - [[조예진]] | ||
Revision as of 08:32, 27 January 2019
Information
Purpose: Learning basic knowledge of robotics Lecture: CS223A, Stanford University Date: Jan 21, 2019 ~
- Prerequite
- Linear Algebra
- Numerical Analysis
Reference
Material: Copy from Stanford Video clips: https://www.youtube.com/watch?v=0yD3uBshJB0&list=PL65CC0384A1798ADF
Study List
Lecture 1
Video Clip
OT
Book
General Manipulator: Robot Arm, using Revolute joint, Prismatic joint
- Robot Arm: base, link, joint, end-effector
- Revolute joint: Rotation movement, 1 Degree of Fredom(DoF)
- Prismatic joint: Linear movement, 1 DoF
- Denote joint type using ε(0 for revolute, 1for prismatic)
Discription of body1 (9 parameters)
- Link location: 3 points (Each point has 3 parameters)
Discription of body2 (6 parameters)
- Body orientation: 3 parameter
- Point on the body: 3 parameter
=> Robot arm(n:links, 1: base) has n DoF
Transformation
- Pure Rotation
- Pure Translation
- General Tasformation
- Inverse Transformation
Configuration Representation There is no universial agreement in the field of robotics as to what is the best orientation representation. Because each representation hase advantages and shortcomings
- Direction Cosines:
- Euler angle representation: ZYX, angle(α, β, γ)
- Fixed angle representation: XYZ, angle(γ, β, α)
- Inverse of an orientation representation
Lecture 2
Video Clip
Kinematics
- Spatial Description
-Task Description
- Transformation
- Representations
Robot arm
- Manipulator: Set of link through the joint
- First link: Base
- Last linke: End-Effector
Book: Direct Kinematics
Previous
- Independent of the structure of the manipulator
Introduction
- A set of parameters specific to each manipulator
- ex) rotation, translation, link of manipulator
- Forware Kinematics
- Inverse Kinematics
Link Description
- Manipulator: Consist of a chain of links from base
- Consecutive links are connected by joints which exert the degree of freedom.
D-H Parameter
- link length(a): length along the common normal from axis (i-1) to axis i
- link twist(α): angle between this parallel line and axis (i-1)
- link offset(θ): distance alont the line on axis i between the common normal for link (i-1) and common normal for link i
- joint angle(d): angle between the two common normal for link (i-1) and common normal for link i
- Revolute joint: joint angle(variable), link offset(constant)
- Prismatic joint: joint angle(constant), link offset(variable)
Comments
선배님 너무 멋있어여 - 조예진
- 새싹 준비입니다 - 우준혁